Artero Reaktor Professional Grooming Clipper (M658) with Free Oil Fresh

MPN: M658
ARTERO TOOLS:Artero Reaktor Clipper (M658)
Calculated at Checkout
Adding to cart… The item has been added

Artero Reaktor is a clipper with an adjustable cutting height from 1mm to 1.9mm by sliding the cutting height control button easily. It includes 5 attachments of 1.5mm, 3mm, 6mm, 9mm, and 12mm for high-level grooming. Its LED screen indicates the speed and battery charge.

Its lightweight ergonomic design and metallic blue finish give it a unique look and handling. With a robust stainless steel blade and a narrow-tooth ceramic overlay, it works with the finest and smoothest hair, providing the best definition and a longer lifespan.

This dog hair cutting clipper is ideal for finishing touches.



Battery: Lithium.

Blade: Adjustable cutting height from 1mm to 1.9mm

Smart Control Charge: Informs about the battery status.

Power: 7w

Usage time: 190-250 minutes.

Charging time: 180 minutes.

Speed: 5000-7000 rpm, 5 speeds.

With cord or cordless.

Includes attachments: 1.5mm/3mm/6mm/9mm/12mm

Multiplug plug: Can be used in other countries.


Directions for Use

We recommend following the steps below:

Take care of the hair. Dirt and debris in the dog's coat can make trimming difficult, so it is recommended to brush the hair well before trimming. Ideally, wash it the day before you plan to trim it to remove as much dirt as possible.

Mark the areas of hair you don't want to cut. Use chalk or adhesive tape to make straight marks before starting.

Clean and lubricate the cutting heads. Make sure there are no obstructions in the cutting head and cover it with oil. Turn on the clipper and let it run for 10 to 20 seconds.

Start the trimming process. Gently move the clipper over the desired area. When you're done, clean the cutting head carefully.



To extend the lifespan of the clipper, we suggest following these steps:

Apply drops of oil to the front and sides of the cutter blades. Remove excess oil with a soft, dry cloth.

Spray lubricants are excellent coolants for clippers. We recommend using Artero Oil Fresh.

To avoid any risk of cutting, always replace a broken or dull blade.

Always clean the cutting heads from any accumulated hair.

Videos Hide Videos Show Videos